Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-26
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcflow stats
The following example enables the aggregated flow counter.
switch(config)# fcflow stats aggregated module 1 index 1005 vsan 1
The following example disables the aggregated flow counter.
switch(config)# no fcflow stats aggregated module 1 index 1005
The following example enables the flow counter for module 1.
switch(config)# fcflow stats module 1 index 1 0x145601 0x5601 0xffffff vsan 1
The following example disables the flow counter for module 1.
switch(config)# no fcflow stats module 2 index 1001
Related Commands Command Description
show fcflow stats Displays the configured FC drop latency parameters.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available