Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-63
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
ficon slot assign port-numbers
swich# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ficon slot 3 assign port-numbers 0-15, 48-63
The following example reserves FICON port numbers 0 through 15 for the first 16 interfaces and 0
through 15 for the second 32 interfaces in slot 3.
switch(config)# ficon slot 3 assign port-numbers 0-15, 0-15
The following example changes the reserved FICON port numbers for up to 24 interfaces in slot 3.
switch(config)# ficon slot 3 assign port-numbers 0-15, 56-63
The following example releases the port numbers.
switch(config)# no ficon slot 3 assign port-numbers 0-15, 56-63
The following example shows the switch output when there are duplicate port numbers.
switch(config)
switch(config)# no ficon slot 1 assign port-numbers
switch(config)# ficon slot 1 assign port-numbers 0-14, 0
WARNING: fc1/16 and fc1/1 have duplicated port-number 0 in port VSAN 99
Related Commands Command Description
show ficon Displays configured FICON details.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available