Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-11
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
install all
3 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
4 slc 1.3(1) 1.3(2a) yes
4 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
5 system 1.3(1) 1.3(2a) yes
5 kickstart 1.3(1) 1.3(2a) yes
5 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
5 loader 1.2(2) 1.2(2) no
6 system 1.3(1) 1.3(2a) yes
6 kickstart 1.3(1) 1.3(2a) yes
6 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
6 loader 1.2(2) 1.2(2) no
7 slc 1.3(1) 1.3(2a) yes
7 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
8 slc 1.3(1) 1.3(2a) yes
8 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
9 ips 1.3(1) 1.3(2a) yes
9 bios v1.1.0(10/24/03) v1.0.8(08/07/03) no
Do you want to continue with the installation (y/n)? [n]
Related Commands Command Description
install module bios Upgrades the supervisor or switching module BIOS.
install module loader Upgrades the bootloader on the active or standby supervisor or modules.
show version Displays software image version information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available