Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-26
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface fc-tunnel
The following example maps the IP address of the destination switch (switch D) to the FC tunnel (100).
switch(config-if)# destination 10.10.10.2
The following example enables traffic flow through this interface.
switch(config-if)# no shutdown
The following example references the configured path in the source switch (switch S).
switch# config t
switch(config)# interface fc-tunnel 100
switch(config)# explicit-path Path1
Related Commands Command Description
show interface fc-tunnel Displays an FC tunnel interface configuration for a specified interface.
fc-tunnel explicit-path Configures a new or existing next-hop path.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available