Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-33
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface iscsi
Examples The following example enables the iSCSI feature.
switch# config t
switch(config)# iscsi enable
The following example enables the store-and-forward mode for iSCSI interfaces 9/1 to 9/4.
switch(config)# interface iscsi 9/1 - 4
switch(config-if)# mode store-and-forward
The following example reverts to using the default pass-thru mode for iSCSI interface 9/1.
switch(config)# interface iscsi 9/1
switch(config-if)# mode pass-thru
Related Commands Command Description
iscsi enable Enables iSCSI.
show interface Displays an interface configuration for a specified interface.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available