Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-73
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ipv6 nd
The following example sets the reachability time to 10000 milliseconds.
switch(config-if)# ipv6 nd reachability-time 10000
The following example sets the retransmission time to 20000 milliseconds.
switch(config-if)# ipv6 nd retransmission-time 20000
Related Commands ipv6 address Configures the IPv6 address and enables IPv6 processing.
ipv6 enable Enables IPv6 processing on the interface.
ipv6 traffic-filter Configures IPv6 ACLs to filter traffic for packets on the interface.
show interface Displays interface configuration information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available