Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
11-81
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
iscsi duplicate-wwn-check
The following example shows how to remove the conflicting nWWN and pWWN.
switch(config)# iscsi initiator name iqn.test-local-nwwn:1-local-pwwn:1
switch(config-iscsi-init)# no static nWWN 22:03:00:0d:ec:02:cb:02
switch(config-iscsi-init)# no static pWWN 22:04:00:0d:ec:02:cb:02
Related Commands Command Description
iscsi initiator name Assigns an iSCSI name and changes to iSCSI initiator configuration
submode.
static Assigns persistent WWNs to an iSCSI initiator in iSCSI initiator
configuration submode.
show iscsi initiator Displays information about configured iSCSI initiators.