Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
1-8
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Understanding CLI Command Hierarchy
fcflow Configure fcflow
fcid-allocation Add/remove company id(or OUIs) from auto area list
fcinterop Interop commands
fcip Enable/Disable FCIP
fcns Name server configuration
fcroute Configure FC routes
fcrxbbcredit Enable extended rx b2b credit configuration
fcs Configure Fabric Config Server
fcsp Config commands for FC-SP
fctimer Configure fibre channel timers
fdmi Config commands for FDMI
ficon Configure ficon information
fspf Configure fspf
hw-module Enable/Disable OBFL information
in-order-guarantee Set in-order delivery guarantee
interface Select an interface to configure
ip Configure IP features
ips Various sibyte module related commands
ipv6 Configure IPv6 features
iscsi Enable/Disable iSCSI
islb ISCSI server load-balancing
isns Configure iSNS
isns-server ISNS server
ivr Config commands for IVR
kernel Kernel options
line Configure a terminal line
logging Modify message logging facilities
mcast Configure multicast
no Negate a command or set its defaults
npiv Nx port Id Virtualization (NPIV) feature enable
ntp NTP Configuration
port-security Configure Port Security
port-track Configure Switch port track config
power Configure power supply
poweroff Poweroff a module in the switch
qos QoS Configuration commands
radius Configure RADIUS configuration
radius-server Configure RADIUS related parameters
rib Configure RIB parameters
rmon Remote Monitoring
role Configure roles
rscn Config commands for RSCN
san-ext-tuner Enable/Disable San Extension Tuner tool
scheduler Config commands for scheduler
scsi-target Scsi-target configuration
snmp-server Configure snmp server
span Enter SPAN configuration mode
ssh Configure SSH parameters
switchname Configure system's network name
system System config command
tacacs+ Enable tacacs+
telnet Enable telnet
tlport Configure TL Port information
trunk Configure Switch wide trunk protocol
username Configure user information.
vsan Enter the vsan configuration mode
wwn Set secondary base MAC addr and range for additional WWNs
zone Zone configuration commands
zone-attribute-group Zone attribute group commands
zoneset Zoneset configuration commands

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available