Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-103
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
islb initiator
The following example enters iSLB initiator configuration submode to configure static mapping (using
the name option) for an iSLB initiator.
switch# config t
switch(config)# islb initiator name iqn.1987-02.co..cisco.initiator
switch(config-islb-init)#
The following example deletes the configured iSLB initiator:
switch(config)# no islb initiator ipaddress name iqn.1987-02.co..cisco.initiator
Related Commands Command Description
show islb initiator
configured
Displays iSLB initiator configuration information.
show islb initiator detail Displays more detailed information about the iSLB configuration.
show islb initiator
iscsi-session
Displays iSLB session details.
show islb initiator
summary
Displays iSLB initiator summary information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available