Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
11-132
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr service-group name
Examples The following example shows how to configure an IVR service group and change to IVR service group
configuration mode.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ivr enable
switch(config)# ivr vsan-topology auto
switch(config)# ivr service-group name serviceGroup1
switch(config-ivr-sg)#
Related Commands Command Description
ivr enable Enables the Inter-VSAN Routing (IVR) feature
ivr vsan-topology auto Enables automatic discovery of the IVR topology.
show ivr Displays IVR feature information.