Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
vii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
clear accounting log 4-26
clear arp-cache 4-27
clear callhome session 4-28
clear cdp 4-29
clear cores 4-30
clear counters (EXEC mode) 4-31
clear counters (SAN extension N port configuration mode) 4-32
clear crypto ike domain ipsec sa 4-33
clear crypto sa domain ipsec 4-34
clear debug-logfile 4-35
clear device-alias 4-36
clear dpvm 4-37
clear fabric-binding statistics 4-38
clear fcanalyzer 4-39
clear fcflow stats 4-40
clear fcns statistics 4-41
clear fcs statistics 4-42
clear fctimer session 4-43
clear fc-redirect config vt 4-44
clear ficon 4-45
clear fspf counters 4-46
clear install failure-reason 4-47
clear ip access-list counters 4-48
clear ips arp 4-49
clear ips stats 4-50
clear ips stats fabric interface 4-51
clear ipv6 access-list 4-52
clear ipv6 neighbors 4-53
clear islb session 4-54
clear ivr fcdomain database 4-55
clear ivr service-group database 4-56
clear ivr zone database 4-57
clear license 4-58
clear line 4-59
clear logging 4-60

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available