Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
15-18
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 15 M Commands
mutual-chap username (iSCSI initiator configuration and iSLB initiator configuration)
The following example assigns a username and password to the initiator’s challenge for an iSLB
initiator.
switch# config t
switch(config)# islb initiator ip-address 100.10.10.10
switch (config-islb-init)# mutual-chap username tester password K9c4*1
The following example removes the username and password from the initiator’s challenge for an iSLB
initiator.
switch (config-islb-init)# no mutual-chap username tester password K9c4*1
Related Commands Command Description
iscsi initiator name Assigns an iSCSI name and changes to iSCSI initiator configuration
submode.
islb initiator Assigns an iSLB name and IP address to the iSLB initiator and enter iSLB
initiator configuration submode.
show iscsi initiator Displays iSCSI initiator information.
show iscsi initiator
configured
Displays iSCSI initiator information for the configured iSCSI initiator.
show iscsi initiator detail Displays detailed iSCSI initiator information.
show iscsi initiator
summary
Displays iSCSI initiator summary information.
show islb initiator Displays iSLB initiator information.
show islb initiator
configured
Displays iSLB initiator information for the configured iSLB initiator.
show islb initiator detail Displays detailed iSLB initiator information.
show islb initiator
summary
Displays iSLB initiator summary information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available