Send documentation comments to mdsfeedback-doc@cisco.com
1-18
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Navigating Through CLI Commands
Software
BIOS: version 1.1.0
loader: version 1.2(2)
kickstart: version 3.0(3) [gdb]
system: version 3.0(3) [gdb]
BIOS compile time: 10/24/03
kickstart image file is: bootflash:///boot-3.0.3
kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25]
system image file is: bootflash:///isan-3.0.3
system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25]
Hardware
cisco MDS 9509 ("Supervisor/Fabric-1")
Intel(R) Pentium(R) III CPU with 1028604 kB of memory.
bootflash: 251904 kB
slot0: 251904 kB
172.22.31.238 kernel uptime is 0 days 0 hour 2 minute(s) 2 second(s)
Last reset at 744021 usecs after Tue Oct 21 14:55:11 1980
Reason: Reset Requested by CLI command reload
System version: 4.0(0.432)
Service:
Example 1-6 Displays the Running Configuration
switch# show running
Building Configuration ...
interface fc1/1
interface fc1/2
interface fc1/3
interface fc1/4
interface mgmt0
ip address 172.22.95.112 255.255.255.0
no shutdown
vsan database
boot system bootflash:system-237; sup-1
boot kickstart bootflash:boot-237 sup-1
callhome
ip default-gateway 172.22.95.1
switchname switch
trunk protocol enable
username admin password 5 /AFDAMD4B2xK2 role network-admin
Example 1-7 Displays the Difference between the Running and Startup Configuration
switch# show running diff
Building Configuration ...
*** Startup-config
--- Running-config
****************** 1,16 ****
fcip enable
ip default-gateway 172.22.91.1
iscsi authentication none
iscsi enable
! iscsi import target fc
iscsi virtual-target name vt
pWWN 21:00:00:04:cf:4c:52:c1
To Next Page
Loading...
Need help?
General
