Send documentation comments to mdsfeedback-doc@cisco.com
18-30
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
portaddress
The following example enables the selected port address and reverts to the factory default of the port
address not being blocked.
switch(config-ficon-portaddr)# no block
The following example prohibits port address 1 in VSAN 2 from talking to ports 3.
switch(config-ficon-portaddr)# prohibit portaddress 3
The following example removes port address 5 from a previously-prohibited state.
switch(config-ficon-portaddr)# no prohibit portaddress 5
The following example assigns a name to the port address.
switch(config-ficon-portaddr)# name SampleName
The following example deletes a previously configured port address name.
switch(config-ficon-portaddr)# no name SampleName
Related Commands Command Description
show ficon Displays configured FICON details.
To Next Page
Loading...
