Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
20-21
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 20 R Commands
revocation-check
The following example shows how to check revocation status first using locally cached CRL and then,
if needed, using OCSP. If CRL is not yet cached locally, only OCSP checking is attempted.
switch(config-trustpoint)# revocation-check crl ocsp
The following example shows how to do no checking for revoked certificates.
switch(config-trustpoint)# revocation-check none
Related Commands Command Description
crypto ca crl-request Configures a CRL or overwrites the existing one for the trust point CA.
ocsp url Configures details of the trust point OSCP.
show crypto ca crl Displays configured CRLs.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available