Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-53
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
ssm enable feature
The following example enables the SANTap feature on the SSM in slot 4.
switch(config) ssm enable feature santap module 4
The following example enables the SCSI flow feature on the SSM in slot 4.
switch(config) ssm enable feature scsi-flow module 4
Related Commands Command Description
scsi-flow distribute Configures the SCSI flow services.
show scsi-flow Displays SCSI flow configuration and status.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available