Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-55
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
static (iSCSI initiator configuration and iSLB initiator configuration)
The following example uses the switch WWN pool to allocate two pWWNs for this iSCSI initiator and
to keep it persistent.
switch(config-iscsi-init)# static pWWN system-assign 2
The following example shows a system-assigned pWWN for an iSLB initiator.
switch# config t
switch(config)# islb initiator ip-address 100.10.10.10
switch(config-islb-init)# static pwwn system-assign 4
The following example removes the system-assigned pWWN for the iSLB initiator.
switch (config-islb-init)# no static pwwn system-assign 4
Related Commands Command Description
iscsi initiator name Assigns an iSCSI name and changes to iSCSI initiator configuration
submode.
show iscsi initiator Displays information about configured iSCSI initiators.
show iscsi initiator
configured
Displays iSCSI initiator information for the configured iSCSI initiator.
show iscsi initiator
detail
Displays detailed iSCSI initiator information.
show iscsi initiator
summary
Displays iSCSI initiator summary information.
islb initiator Assigns an iSLB name and IP address to the iSLB initiator and enters iSLB
initiator configuration submode.
show islb initiator Displays iSLB initiator information.
show islb initiator
configured
Displays iSLB initiator information for the specified configured initiator.
show islb initiator
detail
Displays detailed iSLB initiator information.
show islb initiator
summary
Displays iSLB initiator summary information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available