Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
21-89
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system health clear-errors
Usage Guidelines You can clear the error history for Fibre Channel interfaces, iSCSI interfaces, for an entire module, or
one particular test for an entire module. The battery-charger, the bootflash, the cache-disk, the eobc,
the inband, the loopback, and the mgmt test options can be individually specified for a given module.
The management port test cannot be run on a standby supervisor module.
Examples The following example clears the error history for the specified Fibre Channel interface.
switch# system health clear-errors interface fc 3/1
The following example clears the error history for the specified module.
switch# system health clear-errors interface module 3
The following example clears the management port test error history for the specified module.
switch# system health clear-errors module 2 mgmt