Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-93
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system health internal-loopback
Examples The following example performs the internal loopback test for a Fibre Channel interface.
switch# system health internal-loopback interface iscsi 8/1
Internal loopback test on interface iscsi 8/1 was successful.
Round trip time taken is 79 useconds
Related Commands Command Description
system health Configures Online Health Management System (OHMS) features for a
specified interface or for the entire switch.
system health
external-loopback
Explicitly runs an external OHMS loopback test on demand for a specified
interface or module.
system health
serdes-loopback
Explicitly runs an internal OHMS Serializer/Deserializer (Serdes) loopback
test on demand for a Fibre Channel interface.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available