Cisco Nexus 7000 Series - Page 799

Specifies rate-limit statistics for Layer 2 control
packets over the virtual port channel (vPC) low queue.
vpc-low
(Optional) Displays Layer 3 packet rate limits.layer-3
Specifies rate-limit statistics for Layer 3 control
packets.
control
Specifies rate-limit statistics for Layer 3 glean
packets.
glean
Specifies rate-limit statistics for Layer 3 glean
fast-path packets.
glean-fast
Specifies rate-limit statistics for Layer 3 maximum
transmission unit (MTU) packets.
mtu
Specifies Layer 3 multicast rate limits.multicast
Specifies rate-limit statistics for Layer 3 directly
connected multicast packets.
directly-connected
Specifies rate-limit statistics for Layer 3 local group
multicast packets.
local-groups
Specifies rate-limit statistics for Layer 3 reverse path
forwarding (RPF) leak multicast packets.
rpf-leak
Specifies rate-limit statistics for Layer 3 time-to-live
(TTL) packets.
ttl
(Optional) Displays rate-limit statistics for receive
packets.
receive
Command Default
Displays all rate-limit statistics.
Command Modes
Any command mode
Command History
ModificationRelease
Added the glean-fast keyword.6.2(2)
Added the f1, rl-1, rl-2, rl-3, rl-4, rl-5, and module keywords.5.1(1)
Added the l2pt keyword.5.0(2)
Cisco Nexus 7000 Series Security Command Reference
773
Show Commands
show hardware rate-limiter