Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
PRODUCT DESCRIPTION Control Panel 35
Confidential
Printer Setup
Auto Roll Feeding
On
When this is set to ON, the paper is fed on the platen from the roll paper standby position.
Off
Initialize Settings Print All the settings made using the control panel are returned to their default.
Test Print
Status Sheet Print Prints information on the printer status.
Network Status Sheet Print Prints information on the network status.
Job Information Print Prints a print job history report (up to 10 jobs) that is stored in the printer.
Custom Paper Print Prints the settings made in the Custom Paper menu.
Maintenance
Cutter Adjustment -3.0mm to +3.0mm Fine tune the cut position when printing to roll paper with no margins in all directions. In increments of 8 mil (0.2 mm) in all directions.
Clock Setting MM/DD/YY HH:MM Sets the date and time for the internal clock.
Printer Status
Version
"Firmware version information"
on page 41
Displays the firmware version. Refer to "Firmware version information" on page 41.
Ink Level
(Ink color)
[E**********F]
Displays the ink level in the installed ink cartridges.
Maintenance Box
1
[E**********F]
Displays the waste ink level in the installed maintenance boxes.
2
[E**********F]
Job History
No.0 to No.9
Job No.
Displays the job number that is stored in the printer. The latest job number is 0 (zero).
Ink xx.x ml
The amount of ink consumed
Displays the amount of ink consumed for each job.
Paper xxxxxx cm
2
The amount of paper consumed
Displays the total area of paper used for each job.
Total Prints nnnnnn Pages Displays the total printed pages using 6-digit decimal number.
myEpsonPrinter Status
Not Started, Enabled, Disabled
This function is not supported in some areas or some countries.
Last Uploaded:
(Not Uploaded)
MM/DD/YY HH:MM GMT
Table 1-5. Menu Mode Settings List
Menu Menu Item
Settings
(shaded one is the default)
Explanation
To Next Page
Loading...
Need help?
General