i
────────────────────────────────────────────────────
Introduction
────────────────────────────────────────────────────
Introduction
Inspection
Thank you for purchasing the HIOKI "8841/42 MEMORY HiCORDER."
To obtain maximum performance from the product, please read this manual
first, and keep it handy for future reference.
When the unit is delivered, check and make sure that it has not been
damaged in transit. In particular, check the accessories, panel switches, and
connectors. If the unit is damaged, or fails to operate according to the
specifications, contact your dealer or HIOKI representative.
Accessories
Power cord 1 9231 RECORDING PAPER 1
Protective cover 1 Roll paper attachment 2
PC card protector 1 Connector cable label 1
Instruction Manual 1 Application Disk (CD-R) 1
Options
Input units
8936 ANALOG UNIT
8937 VOLTAGE/TEMP UNIT
8938 FFT ANALOG UNIT
8939 STRAIN UNIT
8940 F/V UNIT
*1
8946 4 ch ANALOG UNIT
8947 CHARGE UNIT
Cards
9557 RS-232C CARD
9558 GP-IB CARD
9559 PRINTER CARD
9578 10BASE-T LAN CARD
9607 MO UNIT (with eject pin)
9608 MEMORY BOARD (24M-WORD
）
total 32 M words
9626 PC CARD 32M
9627 PC CARD 64M
9726 PC CARD 128M
9727 PC CARD 256M
9728 PC CARD 512M
9729 PC CARD 1G
Cables and adapter
9433 DC POWER ADAPTER
9197 CONNECTION CORD (for high voltage, maximum input voltage 500 V)
9198 CONNECTION CORD (for low voltage, maximum input voltage 300 V)
9199 CONVERSION ADAPTOR
9217 CONNECTION CORD (isolated between BNC and BNC)
9320 LOGIC PROBE (maximum input voltage 50 V)
9321 LOGIC PROBE (maximum input voltage 250 V)
9322 DIFFERENTIAL PROBE
To Next Page
Loading...
