Hioki 8841 - Page 16

ii
────────────────────────────────────────────────────
Inspection
────────────────────────────────────────────────────
NOTE
9324 POWER CORD (for logic connector)
9325 POWER CORD (for 8940 F/V UNIT sensor connector)
9665 10:1PROBE
9666 100:1PROBE
*2
9303 PT
9318 CONVERSION CABLE (for 9270-72, 9277-79)
9319 CONVERSION CABLE (for 3273)
Clamps
3273 CLAMP ON PROBE (DC to 50 MHz)
9018-10 CLAMP ON PROBE (10 to 500 A, 40 Hz to 3 kHz)
*2
9132-10 CLAMP ON PROBE (20 to 1000 A, 40 Hz to 1 kHz)
*2
9270 CLAMP ON SENSOR (20 A, 5 Hz to 50 kHz)
*2
9271 CLAMP ON SENSOR (200 A, 5 Hz to 50 kHz)
*2
9272 CLAMP ON SENSOR (20/200 A
,5Hzto10kHz)
9277 UNIVERSAL CLAMP ON CT (20 A, DC to 100 kHz)
9278 UNIVERSAL CLAMP ON CT (200 A, DC to 100 kHz)
*2
9279 UNIVERSAL CLAMP ON CT (500 A, DC to 20 kHz)
*2
9555 SENSOR UNIT (used with the 9270 to 9272, and the 9277 to 9279)
Others
8910 CAN ADAPTER
9333 LAN COMMUNICATOR
9335 WAVE PROCESSOR
9397-01 CARRYING CASE (for 8841)
9349 CARRYING CASE (for 8842)
9231 RECORDING PAPER (6 rolls)
*2
220H PAPER WINDER
*1: Only used with 8841/ *2: no CE marking
The 9270 to 9272 CLAMP ON SENSORs and 9277 to 9279 UNIVERSAL
CLAMP ON CTs are designed for use only with the 9555 SENSOR UNIT,
and cannot be used alone.