Hioki 8841 - Page 349

325
────────────────────────────────────────────────────
14.7 Saving the Data (SAVE)
────────────────────────────────────────────────────
s1271-3, 4
Function
display
Meaning
##F7
:
Enter a file name.
:
Clear the file name.
:
Determines the data to store.
:
Cancel the command to be saved.
Function
display Meaning
:
Enter a character on the cursor.
:
Execute command on the cursor.
:
End
NOTE
(4) Enter the file name.
1. Move the flashing cursor to the file name item.
2. Use the function keys to select
INPUT
.
3. Use the function key to enter characters.
4. Use the cursor keys to move the cursor to the
selection window, and select (set) on the character to
be input.
5. Repeat Steps 3 and 4 to enter a comment (using
characters).
The file and directory names cannot include spaces.
For the explanations in window, see Section 9.9.3.
File names cannot contain the characters +, -, ], or [. Please note that file
names containing these characters will not be saved.