High Voltage SourceMeter Instrument Reference Manual Section 2:
2470-901-01 Rev. A / May 2019 2-35
Change the password through the web interface
You can change the instrument password from the web interface.
The default user name and password is admin. Note that you cannot change the user name; it
remains at admin even if the password has changed.
To change the password:
1. From the web interface Home page, select Admin.
2. In the Current password box, enter the presently used password.
3. In the New password and Confirm new password boxes, enter the new password.
4. Click Submit.
Send commands using the web interface
You can send individual commands using the web interface.
The active command set is listed above the Command box.
To send commands using the web page:
1. From the navigation bar on the left, click Send Commands.
2. If requested, log in.
3. In the Command box, enter the command.
4. Click Send Command to send the command to the instrument. The command is displayed in t
he
C
ommand Output box. If there is a response to the command, it is displayed after the command.
5. To view any events that have occurred, click Return Error.
6. To clear the Command Output list, click Clear Output.
Extract buffer data using the web interface
The Extract Data page of the web interface allows you to download reading buffer data from the
instrument.
To download buffer data:
1. From the web interface page, click Extract Data.
2. In the CSV File column, click the name of the file that you want to download.
3. Follow the instructions for your browser to open the file. Typically, the file opens in Microsoft
Excel.
To Next Page
Loading...
Need help?
General
