High Voltage SourceMeter Instrument Reference Manual Section 3:
2470-901-01 Rev. A / May 2019 3-15
Measure view area
The Measure view area of the home screen displays the value of the present measurement and other
measurement information.
Figure 39: MEASURE area of the home screen
The Range button on the lower left displays the presently selected measure range. Select the button
to change the range.
The indicators on the right edge of the Measure view area show any measure settings that affect the
displayed measurement value. The indicators and what they mean are defined in the following table.
Indicator Meaning
Instrument automatically retrieves reference values
A filter is applied to the measurement
Limit test one is enabled and measurement failed
Limit test one is enabled and measurement passed
L2FAIL Limit test two is enabled and measurement failed
Limit test two is enabled and measurement passed
A percent, mx+b, or reciprocal calculation is applied
Relative offset is applied
Interactive swipe screens
The 2470 touchscreen display has multiple screens that you can access by swiping left or right on the
lower half of the display. The options available in the swipe screens are described in the following
topics.
To Next Page
Loading...
Need help?
General
