Xerox WorkCentre 6505 Service Manual

4-60 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
General Troubleshooting
ADF Tray Sensor
1. Enter Service Diagnostics (page 4-8).
2. Place a sheet of media in the ADF Tray.
3. Perform the Fax/Scanner Diag > Scanner Maintenance > IIT I/O Check
>Tray Sensor test.
4. Check the Control panel display for Status ON.
5. Press Stop to return one step higher menu.
6. Remove the media from the ADF Tray.
7. Perform the Fax/Scanner Diag > Scanner Maintenance > IIT I/O Check
>Tray Sensor test.
8. Check the sensor “Status OFF”
9. Press the Stop button to stop the ADF Tray Sensor test.
s6500-099
Control Panel
Normal
Tray Sensor
Status OFF
Tray Sensor
Status OFF
http://www.manuals4you.com

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi