Xerox WorkCentre 6505 Service Manual

I – 10 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Index
Troubleshooting
AC power, 4-67
Control Panel, 4-66
DC Power, 4-68
Error Code, 3-35 to 3-164
Interlock Switch, 4-70
Print Quality, 5-7 to 5-42
U
Unacceptable Paper, A-15
Unfused image, 5-36
Upper Link Pivot Shaft
part number, 9-8
removal, 8-31
USB Port
Type A, 1-5
USB Port, Type B
location, SFP, 1-6
MFP, 1-7
V
Voids, 5-23
W
Warm up time, 1-17
Waste Toner, 2-12, 2-53
Wiring
left side harness, part number, SFP & MFP, 9-17
option harness, MFP, part number, 9-17
option harness, SFP, part number, 9-17
Wiring Diagrams
MFP, 10-37 to 10-51
MFP System Connections, 10-37
SFP, 10-24 to 10-36
SFP System Connections, 10-24
symbols used in diagrams, 10-21
X
Xerographics
component locations, 2-2
process, 2-2

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi