CARD-MEM (Memory Card)
Issue 4 May 2002
10-357 555-233-123
2110
2111
ABORT
ABORT
Memory card is not present.
Switch does not recognize the memory card.
1. Insert a formatted memory card into the slot at the
TN2401/TN794 NetPkt or TN777B Netcon circuit pack.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
101
102
103
116
118
132
134
148
150
FAIL
FAIL
FAIL
FAIL
FAIL
FAIL
FAIL
FAIL
FAIL
Memory card is a system-upgrade memory card.
Memory card does not contain an Announcements file (for
systems configured with the Announcement feature).
Memory card is a system-upgrade memory card, and uses
announcement feature without available announcement file.
Memory card capacity does not match system configuration
capacity.
Memory card uses announcement feature without available
announcement file, and memory card does not match system
configuration.
System translation reaches 98% of capacity.
Memory card uses announcement feature without
announcement file in memory card, and system translation
reaches a 98% capacity.
Memory card capacity does not match the system
configuration, and system translation reaches 98% capacity.
Memory card uses announcement feature without
announcement file in memory card, memory card capacity
does not match the system configuration, and system
translation reaches 98% capacity.
1. Replace the memory card with a 10 MB memory card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
PASS Memory card matches the system configuration, and has
enough space for saving translations and announcements (if
applicable).
Table 10-138. TEST #697 Memory Card Match Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
