Maintenance Object Repair Procedures
555-233-123
10-358 Issue 4 May 2002
Memory Card Directory Recovery Test (#699)
All memory cards (except system software upgrade memory cards) have two
copies of both directory files and translation files. This ensures the memory card
has at least one good translation file in at any time, especially during the “save
translation” operation. If maintenance detects that one of a pair of files is missing,
maintenance can build the file.
This nondestructive test
■ Verifies the integrity of active and backup directory files
■ Requests directory file rebuild, if necessary
Table 10-139. TEST #699 Memory Card Directory Recovery Test
Error
Code
Te s t
Result Description/Recommendation
1192 ABORT Applications are accessing the memory card.
1. Wait 10 minutes for the applications to complete.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the situation persists, escalate the problem.
2012
2106
2114
ABORT There is an Internal system error.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this
test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
2110
2111
ABORT
ABORT
Memory card is not present.
Switch does not recognize the memory card.
1. Insert a formatted memory card into the slot at the
TN2401/TN794 NetPkt or TN777B Netcon circuit pack.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
2112 ABORT Memory card is a system-upgrade memory card.
1. Replace the inserted memory card with a user’s memory
card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
Continued on next page