display alarms
Issue 4 May 2002
8-55555-233-123
The fields on the options screen are described below:
ALARM TYPES
Enter y (yes) or n (no) in any of the 5 alarm type fields
Interval
Enter one of the codes below:
m = last month
h = last hour
d = last day
w = last week
a = all
From
Month/day/year (example: 01/01/97); if the From date is blank,
the report contains all the active alarms for the month prior to the
current date.
To
Month/day/year (example: 01/15/97); if the To date is not
entered, the report contains all the active alarms starting with the
From date to the current date.
Cabinet
Administered cabinet number (1-3)
Port Network
1-3
Board Number
Board address (PCSS); example: 01A20
Port
Port address (PCSSpp); example: 01A2031
Category
Object code for the equipment category. Press HELP in this field
to view a list of the object codes.
Extension
Extension number (per dial-plan)
Trunk
Enter a group number or a group and member number:
■ Enter only the group number (01-99) to display all members
in the group. Example: 01/__
■ Enter both the group number (01-99) and member number
(01-99) to display a specific member in a group. Example:
01/99
display alarms Page 1 of 1
ALARM REPORTS
The following options control which alarms will be displayed.
ALARM TYPES
Active? y_ Resolved? n_
Major? y_ Minor? y_ Warning? y_
REPORT PERIOD
Interval: m_ From: __/__/__:__ To: __/__/__:__
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Cabinet: ____
Port Network: __
Board Number: _______
Port: ________
Category: ________
Extension: _____
Trunk ( group/member ): ___/___
To Next Page
Loading...
