Send documentation comments to mdsfeedback-doc@cisco.com
22-174
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show iscsi stats
The following command displays detailed iSCSI statistics.
switch# show iscsi stats detail
iscsi8/1
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iSCSI Forward:
Command: 0 PDUs (Received: 0)
Data-Out (Write): 0 PDUs (Received 0), 0 fragments, 0 bytes
FCP Forward:
Xfer_rdy: 0 (Received: 0)
Data-In: 0 (Received: 0), 0 bytes
Response: 0 (Received: 0), with sense 0
TMF Resp: 0
iSCSI Stats:
Login: attempt: 0, succeed: 0, fail: 0, authen fail: 0
Rcvd: NOP-Out: 0, Sent: NOP-In: 0
NOP-In: 0, Sent: NOP-Out: 0
TMF-REQ: 0, Sent: TMF-RESP: 0
Text-REQ: 0, Sent: Text-RESP: 0
SNACK: 0
Unrecognized Opcode: 0, Bad header digest: 0
Command in window but not next: 0, exceed wait queue limit: 0
Received PDU in wrong phase: 0
FCP Stats:
Total: Sent: 0
Received: 0 (Error: 0, Unknown: 0)
Sent: PLOGI: 0, Rcvd: PLOGI_ACC: 0, PLOGI_RJT: 0
PRLI: 0, Rcvd: PRLI_ACC: 0, PRLI_RJT: 0, Error resp: 0
LOGO: 0, Rcvd: LOGO_ACC: 0, LOGO_RJT: 0
ABTS: 0, Rcvd: ABTS_ACC: 0
TMF REQ: 0
Self orig command: 0, Rcvd: data: 0, resp: 0
Rcvd: PLOGI: 0, Sent: PLOGI_ACC: 0
LOGO: 0, Sent: LOGO_ACC: 0
PRLI: 0, Sent: PRLI_ACC: 0
ABTS: 0
iSCSI Drop:
Command: Target down 0, Task in progress 0, LUN map fail 0
CmdSeqNo not in window 0, No Exchange ID 0, Reject 0
Persistent Resv 0 Data-Out: 0, TMF-Req: 0
FCP Drop:
Xfer_rdy: 0, Data-In: 0, Response: 0
Buffer Stats:
Buffer less than header size: 0, Partial: 0, Split: 0
Pullup give new buf: 0, Out of contiguous buf: 0, Unaligned m_data: 0
To Next Page
Loading...
Need help?
General
