Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-175
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show iscsi stats
iscsi8/2
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iSCSI Forward:
Command: 0 PDUs (Received: 0)
Data-Out (Write): 0 PDUs (Received 0), 0 fragments, 0 bytes
FCP Forward:
Xfer_rdy: 0 (Received: 0)
Data-In: 0 (Received: 0), 0 bytes
Response: 0 (Received: 0), with sense 0
...
The following command displays detailed statistics for the specified iSCSI interface.
switch# show iscsi stats iscsi 8/1
iscsi8/1
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available