Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-289
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show santap module
Examples The following example displays the SANTap AVT configuration.
switch# show santap module 2 avt
AVT Information :
avt pwwn = 2a:4b:00:05:30:00:22:25
avt nwwn = 2a:60:00:05:30:00:22:25
avt id = 12
avt vsan = 4
avt if_index = 0x1080000
hi pwwn = 21:00:00:e0:8b:07:61:aa
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt vsan = 1
The following example displays the SANTap AVT LUN configuration.
switch# show santap module 2 avtlun
AVT LUN Information :
avt pwwn = 2a:4b:00:05:30:00:22:25
avt lun = 0x0
xmap id = 16
avt id = 12
tgt lun = 0x0
The following example displays the SANTap CVT configuration.
switch# show santap module 2 cvt
CVT Information :
cvt pwwn = 25:3c:00:05:30:00:22:25
cvt nwwn = 25:3d:00:05:30:00:22:25
cvt id = 1
cvt xmap_id = 2
cvt vsan = 10
The following example displays the SANTap DVT configuration.
switch# show santap module 2 dvt
DVT Information :
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt nwwn = 20:00:00:20:37:88:20:ef
dvt id = 3
dvt mode = 3
dvt vsan = 3
dvt fp_port = 0
dvt if_index = 0x1080000
dvt name = MYDVT
The following example displays the SANTap DVTLUN configuration.
switch# show santap module 2 dvtlun
DVT LUN Information :
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt lun = 0x0
xmap id = 8
dvt id = 3
dvt mode = 0
dvt vsan = 3
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt lun = 0x0
tgt vsan = 1

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available