Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
22-313
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sprom
Examples The following example displays management module information. This module and command are
specific to the Cisco MDS 9216 switch.
switch# show sprom mgmt-module
DISPLAY SAM sprom contents:
Common block:
Block Signature :0xabab
Block Version :2
Block Length :156
Block Checksum :0x1295
EEPROM Size :0
Block Count :2
FRU Major Type :0x0
FRU Minor Type :0x0
OEM String :Cisco Systems Inc
Product Number :SAM SMITH
Serial Number :12345678901
Part Number :SAM-SMITH-06
Part Revision :A0
Mfg Deviation :
H/W Version :1.0
Mfg Bits :1
Engineer Use :0
snmpOID :0.0.0.0.0.0.0.0
Power Consump :-200
RMA Code :0-0-0-0
Linecard Module specific block:
Block Signature :0x6003
Block Version :2
Block Length :103
Block Checksum :0x3c7
Feature Bits :0x0
HW Changes Bits :0x0
Card Index :9009
MAC Addresses :00-12-34-56-78-90
Number of MACs :4
Number of EOBC links :4
Number of EPLD :0
Port Type-Num :200-16
SRAM size :0
Sensor #1 :0,0
Sensor #2 :0,0
Sensor #3 :0,0
Sensor #4 :0,0
Sensor #5 :0,0
Sensor #6 :0,0
Sensor #7 :0,0
Sensor #8 :0,0
The following command displays supervisor module information.
switch# show sprom sup
DISPLAY supervisor sprom contents:
Common block:
Block Signature : 0xabab
Block Version : 2
Block Length : 156
Block Checksum : 0x10a8
EEPROM Size : 512
Block Count : 2
FRU Major Type : 0x6002
FRU Minor Type : 0x7d0
OEM String : Cisco Systems
Product Number : DS-X9530-SF1-K9