Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-314
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sprom
Serial Number : abcdefgh
Part Number : 73-7523-06
Part Revision : 0.0
Mfg Deviation : 0.0
H/W Version : 0.0
Mfg Bits : 0
Engineer Use : 0
snmpOID : 9.5.1.3.1.1.2.2000
Power Consump : -524
RMA Code : 0-0-0-0
Supervisor Module specific block:
Block Signature : 0x6002
Block Version : 2
Block Length : 103
Block Checksum : 0x927
Feature Bits : 0x0
HW Changes Bits : 0x0
Card Index : 9003
MAC Addresses : 00-05-30-00-18-be
Number of MACs : 4
Number of EPLD : 1
EPLD A : 0x0
Sensor #1 : 75,60
Sensor #2 : 60,55
Sensor #3 : -127,-127
Sensor #4 : -127,-127
Sensor #5 : -128,-128
Sensor #6 : -128,-128
Sensor #7 : -128,-128
Sensor #8 : -128,-128
Related Commands Command Description
show hardware Displays brief information about the list of field replacable units in the
switch.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available