Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-330
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show system health
Current health information for module 10.
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 10 Sec Running Enabled
EOBC 5 Sec Running Enabled
Loopback 5 Sec Running Enabled
-----------------------------------------------------------------
Current health information for module 11.
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 10 Sec Running Enabled
EOBC 5 Sec Running Enabled
Loopback 5 Sec Running Enabled
CF checksum 7 Days Halted Enabled
CF re-flash 30 Days Halted Enabled
-----------------------------------------------------------------
Current health information for module 12.
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 10 Sec Running Enabled
EOBC 5 Sec Running Enabled
Loopback 5 Sec Running Enabled
-----------------------------------------------------------------
Current health information for module 13.
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 10 Sec Running Enabled
EOBC 5 Sec Running Enabled
-----------------------------------------------------------------
The following example displays the health statistics for all modules.
switch# show system health statistics
Test statistics for module # 1
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
Bootflash Running 5s 12900 12900 0 0 0
EOBC Running 5s 12900 12900 0 0 0
Loopback Running 5s 12900 12900 0 0 0
------------------------------------------------------------------------------
Test statistics for module # 3
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
Bootflash Running 5s 12890 12890 0 0 0
EOBC Running 5s 12890 12890 0 0 0
Loopback Running 5s 12892 12892 0 0 0
------------------------------------------------------------------------------

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available