Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-331
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show system health
Test statistics for module # 5
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
InBand Running 5s 12911 12911 0 0 0
Bootflash Running 5s 12911 12911 0 0 0
EOBC Running 5s 12911 12911 0 0 0
Management Port Running 5s 12911 12911 0 0 0
------------------------------------------------------------------------------
Test statistics for module # 6
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
InBand Running 5s 12907 12907 0 0 0
Bootflash Running 5s 12907 12907 0 0 0
EOBC Running 5s 12907 12907 0 0 0
------------------------------------------------------------------------------
Test statistics for module # 8
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
Bootflash Running 5s 12895 12895 0 0 0
EOBC Running 5s 12895 12895 0 0 0
Loopback Running 5s 12896 12896 0 0 0
------------------------------------------------------------------------------
The following example displays the statistics for a module.
switch# show system health statistics module 3
Test statistics for module # 3
------------------------------------------------------------------------------
Test Name State Freq(s) Run Pass Fail CFail Errs
------------------------------------------------------------------------------
Bootflash Running 5s 12932 12932 0 0 0
EOBC Running 5s 12932 12932 0 0 0
Loopback Running 5s 12934 12934 0 0 0
------------------------------------------------------------------------------
The following example displays the loopback test statistics for the entire switch.
switch# show system health statistics loopback
-----------------------------------------------------------------
Mod Port Status Run Pass Fail CFail Errs
1 16 Running 12953 12953 0 0 0
3 32 Running 12945 12945 0 0 0
8 8 Running 12949 12949 0 0 0
-----------------------------------------------------------------

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available