Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-342
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show tech-support
VSAN 4093: name:VSAN4093, state:active, interop mode:default
domain id:0x77(119), WWN:2f:fd:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status FCOT Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc1/1 1 auto on fcotAbsent -- -- --
fc1/2 1 auto on fcotAbsent -- -- --
fc1/3 1 auto on fcotAbsent -- -- --
fc1/4 1 auto on fcotAbsent -- -- --
fc1/5 1 auto on notConnected swl -- --
fc1/6 1 auto on fcotAbsent -- -- --
fc1/7 1 auto on fcotAbsent -- -- --
fc1/8 1 auto on fcotAbsent -- -- --
fc1/9 1 auto on fcotAbsent -- -- --
fc1/10 1 auto on fcotAbsent -- -- --
fc1/11 1 auto on fcotAbsent -- -- --
fc1/12 1 auto on fcotAbsent -- -- --
fc1/13 1 auto on fcotAbsent -- -- --
fc1/14 1 auto on fcotAbsent -- -- --
fc1/15 1 auto on fcotAbsent -- -- --
fc1/16 1 auto on fcotAbsent -- -- --
-------------------------------------------------------------------------------
Interface Status Speed
(Gbps)
-------------------------------------------------------------------------------
sup-fc0 up 1
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
mgmt0 up 10.76.100.164/24 100 Mbps 1500
Power Supply:
-----------------------------------------------------
PS Model Power Power Status
(Watts) (Amp @42V)
-----------------------------------------------------
1 WS-CAC-950W 919.38 21.89 ok
2 -- -- absent
Mod Model Power Power Power Power Status
Requested Requested Allocated Allocated
(Watts) (Amp @42V) (Watts) (Amp @42V)
--- ------------------- ------- ---------- --------- ---------- ----------
1 DS-X9216-K9-SUP 220.08 5.24 220.08 5.24 powered-up
2 DS-X9032 199.92 4.76 199.92 4.76 powered-up
Power Usage Summary:
--------------------
Power Supply redundancy mode: redundant

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available