Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-341
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show tech-support
Fan Model Hw Status
------------------------------------------------------
Chassis DS-2SLOT-FAN 0.0 ok
PS-1 -- -- ok
PS-2 -- -- absent
Temperature:
---------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
---------------------------------------------------------------
1 1 75 60 30 ok
1 2 65 50 28 ok
1 3 -127 -127 40 ok
1 4 -127 -127 36 ok
2 1 75 60 32 ok
2 2 65 50 26 ok
2 3 -127 -127 41 ok
2 4 -127 -127 31 ok
The show tech-support brief command provides a summary of the current running state of the switch.
switch# show tech-support brief
Switch Name : vegas01
Switch Type : DS-X9216-K9-SUP
Kickstart Image : 1.3(2a) bootflash:///m9200-ek9-kickstart-mz.1.3.1.10.bin
System Image : 1.3(2a) bootflash:///m9200-ek9-mz.1.3.1.10.bin
IP Address/Mask : 10.76.100.164/24
Switch WWN : 20:00:00:05:30:00:84:9e
No of VSANs : 9
Configured VSANs : 1-6,4091-4093
VSAN 1: name:VSAN0001, state:active, interop mode:default
domain id:0x6d(109), WWN:20:01:00:05:30:00:84:9f [Principal]
active-zone:VR, default-zone:deny
VSAN 2: name:VSAN0002, state:active, interop mode:default
domain id:0x7d(125), WWN:20:02:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 3: name:VSAN0003, state:active, interop mode:default
domain id:0xbe(190), WWN:20:03:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 4: name:VSAN0004, state:active, interop mode:default
domain id:0x5a(90), WWN:20:04:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 5: name:VSAN0005, state:active, interop mode:default
domain id:0x13(19), WWN:20:05:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 6: name:VSAN0006, state:active, interop mode:default
domain id:0x1f(31), WWN:20:06:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 4091: name:VSAN4091, state:active, interop mode:default
domain id:0x08(8), WWN:2f:fb:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
VSAN 4092: name:VSAN4092, state:active, interop mode:default
domain id:0x78(120), WWN:2f:fc:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available