EasyManuals Logo

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1329 background imageLoading...
Page #1329 background image
Send documentation comments to mdsfeedback-doc@cisco.com
22-355
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show version
2x1GE IPS, 14x1/2Gbps FC Module Power Manager 0x07
XBUS IO 0x05
UD Flow Control 0x05
PCI ASIC I/F 0x07
IPS DB I/F 0x1a
The following example displays the entire output for the show version command.
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS: version 1.1.0
loader: version 1.2(2)
kickstart: version 3.0(3) [gdb]
system: version 3.0(3) [gdb]
BIOS compile time: 10/24/03
kickstart image file is: bootflash:///boot-3.0.3
kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25]
system image file is: bootflash:///isan-3.0.3
system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25]
Hardware
cisco MDS 9509 ("Supervisor/Fabric-1")
Intel(R) Pentium(R) III CPU with 1028604 kB of memory.
bootflash: 251904 kB
slot0: 251904 kB
172.22.31.238 kernel uptime is 0 days 0 hour 2 minute(s) 2 second(s)
Last reset at 744021 usecs after Tue Oct 21 14:55:11 1980
Reason: Reset Requested by CLI command reload
System version: 4.0(0.432)
Service:
The following examples display a before and after comparison scenario after the loader version is
updated.
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS: version 1.1.0

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
CategorySwitch
Operating SystemCisco NX-OS
PortsVaries by model
ProtocolsFibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
RedundancyRedundant supervisors, power supplies, and fans
ManagementCisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization SupportVSANs (Virtual SANs)
Security FeaturesFibre Channel Security Protocol (FC-SP)
Hot Swappable Componentspower supplies, fans
Power Supply OptionsAC and DC options available

Related product manuals