Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-356
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show version
loader: version 1.2(1) <---------------existing version
kickstart: version 3.0(3) [gdb]
system: version 3.0(3) [gdb]
BIOS compile time: 10/24/03
kickstart image file is: bootflash:///boot-3.0.3
kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25]
system image file is: bootflash:///isan-3.0.3
system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25]
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS: version 1.1.0
loader: version 1.2(2)
<---------------new version
.....
The following example displays the version details for a specified module.
switch# show ver mod 4
Mod No Mod Type SW Version SW Interim Version
4 LC 1.0(3) 1.0(3)

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available