Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
xxxv
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
New and Changed Information
New and Changed Commands for Cisco SAN-OS Release 3.1(3)
System default port mode F system default switchport mode F option
show system command
S Commands
Show Commands
CompactFlash system health module cf-crc-check option
system health module cf-re-flash option
system health cf-crc-check command
system health cf-re-flash command
show system command
S Commands
Show Commands
Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available