Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
xxxvi
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
New and Changed Information
Cisco Fabric Switch for HP
c-Class BladeSystem and
Cisco Fabric Switch for IBM
BladeCenter
Added the “Port Names and Port
Mapping”section.
CLI Overview
clear rlir (interface bay | ext option) C Commands
interface (bay | ext) option
interface bay | ext command
I Commands
system health (Configuration mode)
(interface bay | ext option)
system health clear-errors (interface bay |
ext option)
system health external-loopback (interface
bay | ext option)
system health internal-loopback (interface
bay | ext option)
system health serdes-loopback (interface
bay | ext option)
S Commands
show flogi (interface bay | ext option)
show interface (interface bay | ext option)
show vsan (interface bay | ext option)
Show Commands
vsan database (interface bay | ext option) V Commands
zone name (configuration mode) (interface
bay | ext option)
zoneset (EXEC mode) (interface bay | ext
option)
Z Commands
Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available