Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
xxxix
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
New and Changed Information
New and Changed Commands for Cisco SAN-OS Release 3.0(3)
Fiber Channel fcroute command F Commands
Registered Link Incident
Reports
rlir preferred-cond fcid command R Commands
show rlir command Show Commands
Scheduler enhancements scheduler aaa-authentication command S Commands
Technical support show tech-support command (acl, bootvar,
cfs, name, fcip, ficon, fspf, fta, ip, iscsi, islb,
license, logging, port, port-channel,
prefpath, qos, snmp, sysmgr, and vrrp
options)
Show Commands
New and Changed Commands for Cisco SAN-OS Release 3.0(2)
Fibre Channel domains fcdomain command (optimize fast-restart
option)
F Commands
FICON enhancements ficon port default-state prohibit-all
command
F Commands
show ficon command (port default-state
option)
Show Commands
New and Changed Commands for Cisco SAN-OS Release 3.0(1)
AAA enhancements aaa authentication login command (mschap
option)
A Commands
Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available