Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-47
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcsp dhchap
Examples The following example enables FC-SP.
switch## config terminal
switch(config)# # fcsp enable
switch (config)#
The following example configures the use of only the SHA-1 hash algorithm.
switch(config)# fcsp dhchap hash sha1
The following example configures the use of only the MD-5 hash algorithm.
switch(config)# fcsp dhchap hash md5
The following example defines the use of the default hash algorithm priority list of MD-5 followed by
SHA-1 for DHCHAP authentication.
switch(config)# fcsp dhchap hash md5 sha1
The following example reverts to the factory default priority list of the MD-5 hash algorithm followed
by the SHA-1 hash algorithm.
switch(config)# no fcsp dhchap hash sha1
The following example prioritizes the use of DH group 2, 3, and 4 in the configured order.
switch(config)# fcsp dhchap group 2 3 4
The following example reverts to the DHCHAP factory default order of 0, 4, 1, 2, and 3 respectively.
switch(config)# no fcsp dhchap group 0
The following example configures a clear text password for the local switch.
switch(config)# fcsp dhchap password 0 mypassword
The following example configures a clear text password for the local switch to be used for the device
with the specified WWN.
switch(config)# fcsp dhchap password 0 mypassword 30:11:bb:cc:dd:33:11:22
The following example removes the clear text password for the local switch to be used for the device
with the specified WWN.
switch(config)# no fcsp dhchap password 0 mypassword 30:11:bb:cc:dd:33:11:22
The following example configures a password entered in an encrypted format for the local switch.
switch(config)# fcsp dhchap password 7 sfsfdf
The following example configures a password entered in an encrypted format for the local switch to be
used for the device with the specified WWN.
switch(config)# fcsp dhchap password 7 sfsfdf 29:11:bb:cc:dd:33:11:22
The following example removes the password entered in an encrypted format for the local switch to be
used for the device with the specified WWN.
switch(config)# no fcsp dhchap password 7 sfsfdf 29:11:bb:cc:dd:33:11:22
The following example configures a clear text password for the local switch to be used with any
connecting device.
switch(config)# fcsp dhchap password mypassword1

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available