Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-48
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcsp dhchap
The following example configures a password for another switch in the fabric which is identified by the
Switch WWN device name.
switch(config)# fcsp dhchap devicename 00:11:22:33:44:aa:bb:cc password NewPassword
The following example removes the password entry for this switch from the local authentication
database.
switch(config)# no fcsp dhchap devicename 00:11:22:33:44:aa:bb:cc password NewPassword
The following example configures a clear text password for another switch in the fabric which is
identified by the Switch WWN device name.
switch(config)# fcsp dhchap devicename 00:11:55:66:00:aa:bb:cc password 0 NewPassword
The following example configures a password entered in an encrypted format for another switch in the
fabric which is identified by the Switch WWN device name.
switch(config)# fcsp dhchap devicename 00:11:22:33:55:aa:bb:cc password 7 asdflkjh
Related Commands Command Description
fcsp enable Enable FC-SP.
show fcsp Displays configured FC-SP information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available