Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
1-22
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Searching and Filtering CLI Output
vsan 1 wwn 28:12:00:05:30:00:06:ea fcid 0x680004 dynamic
vsan 1 wwn 28:13:00:05:30:00:06:ea fcid 0x680005 dynamic
vsan 1 wwn 28:14:00:05:30:00:06:ea fcid 0x680006 dynamic
vsan 1 wwn 28:1f:00:05:30:00:06:ea fcid 0x680007 dynamic
vsan 1 wwn 28:20:00:05:30:00:06:ea fcid 0x680008 dynamic
vsan 1 wwn 21:00:00:e0:8b:05:76:28 fcid 0x680100 area dynamic
vsan 1 wwn 20:c5:00:05:30:00:06:de fcid 0x680200 area dynamic
vsan 1 wwn 28:2b:00:05:30:00:06:ea fcid 0x680012 dynamic
vsan 1 wwn 28:2d:00:05:30:00:06:ea fcid 0x680013 dynamic
vsan 1 wwn 28:2e:00:05:30:00:06:ea fcid 0x680014 dynamic
vsan 1 wwn 28:2f:00:05:30:00:06:ea fcid 0x680015 dynamic
vsan 1 wwn 28:30:00:05:30:00:06:ea fcid 0x680016 dynamic
--More--
The following is partial sample output of the show tech-support EXEC command. It begins displaying
unfiltered output with the first line that contain the string
show interface brief.
switch# show tech-support | begin "show interface brief"
-------------------- show interface brief ------------------
-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status FCOT Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc4/1 1 FX -- sfpAbsent -- -- --
fc4/2 1 FX -- sfpAbsent -- -- --
fc4/3 1 FX -- sfpAbsent -- -- --
fc4/4 1 FX -- sfpAbsent -- -- --
fc4/5 1 FX -- up swl F 1 --
fc4/6 1 FX -- sfpAbsent -- -- --
fc4/7 1 FX -- sfpAbsent -- -- --
fc4/8 1 FX -- sfpAbsent -- -- --
fc4/9 1 E on notConnected swl -- --
fc4/10 1 FX -- sfpAbsent -- -- --
fc4/11 1 FX -- sfpAbsent -- -- --
fc4/12 1 FX -- sfpAbsent -- -- --
fc4/13 1 FX -- sfpAbsent -- -- --
fc4/14 1 FX -- sfpAbsent -- -- --
fc4/15 1 FX -- sfpAbsent -- -- --
--More--
The following is partial sample output of the show running-config | exclude EXEC command. It
excludes any output line that contain the pattern
vsan.
switch# show running-config | exclude vsan
version 2.1(1a)
poweroff module 9
fcdomain fcid database
ssm enable feature nasb interface fc4/1-4
ssm enable feature santap module 4
ssm enable feature nasb interface fc9/1-4
ssm enable feature santap interface fc9/5-8
ssm enable feature santap interface fc9/21-28
switchname switch
boot kickstart bootflash:/b2193 sup-1
boot system bootflash:/r2193 sup-1
boot kickstart bootflash:/b2193 sup-2
boot system bootflash:/r2193 sup-2
boot ssi bootflash:/laslc1.bin module 1
boot ssi bootflash:/laslc1.bin module 2
boot ssi bootflash:/laslc1.bin module 3
boot ssi bootflash:/laslc1.bin module 4
boot ssi bootflash:/laslc1.bin module 7