Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
1-23
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Searching and Filtering CLI Output
boot ssi bootflash:/laslc1.bin module 8
boot ssi bootflash:/laslc1.bin module 9
line console
speed 38400
--More--
The following is partial sample output of the show interface EXEC command. It includes all output with
the pattern
vsan.
switch# show interface | include vsan
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
[information deleted]
The following is partial sample output of the show interface EXEC command. It includes all output with
the pattern
FX plus the next and previous five lines of output.
switch# show interface | include FX next 5 prev 5
fc4/1 is down (SFP not present)
Hardware is Fibre Channel
Port WWN is 20:c1:00:05:30:00:06:de
Admin port mode is FX
Port vsan is 1
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
--
0 transmit B2B credit remaining
fc4/2 is down (SFP not present)
Hardware is Fibre Channel
Port WWN is 20:c2:00:05:30:00:06:de
Admin port mode is FX
Port vsan is 1
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
--
--More--
The following output of the show running-config EXEC command. It displays the number lines, or
count, of the output.
switch# show running-config | count
214
switch#
The following output of the show interface brief EXEC command. It displays the interfaces where the
administration mode is
FX.
switch# show interface brief | include FX
fc4/1 1 FX -- sfpAbsent -- -- --
fc4/2 1 FX -- sfpAbsent -- -- --
fc4/3 1 FX -- sfpAbsent -- -- --
fc4/4 1 FX -- sfpAbsent -- -- --
fc4/5 1 FX -- up swl F 1 --
fc4/6 1 FX -- sfpAbsent -- -- --
fc4/7 1 FX -- sfpAbsent -- -- --