SHOP MANUAL
GENERAL INSTRUCTIONS
Ch 0 page 18
In case of Fire
If a fire occurs:
• Do not attempt to move machine or continue operations.
• Turn starter switch to "O" (OFF) position to stop engine.
• Use handrails and steps to get off machine.
• Immediately call for help or fire station.
• When using a fire extinguisher, always aim extinguisher
at base of fire.
• If an optional fire extinguishing system is in place, be
familiar with its operating procedures.
Depending on job conditions, other procedures could be
necessary if a re occurs.
Fire Extinguisher and First-Aid Kit
(Emergency Medical Kit)
To be prepared in the event of a fire:
• Be sure that fire extinguishers have been provided and
read labels to ensure that you know how to use them. It is
recommended that an appropriately sized (2.27 kg [5 lb]
or larger) multipurpose A/B/C fire extinguisher be mount-
ed in cabin. Check and service fire extinguisher at regular
intervals and make sure that all work site crew members
are adequately trained in its use.
• Inspect fire extinguisher and service fire extinguisher
regularly.
• Follow instructions on extinguisher instruction plate.
• Keep a first aid kit in storage compartment (Figure 15)
and keep another kit at work site. Check kit periodically
and keep it properly supplied.
• Keep emergency numbers for doctor, ambulance service,
hospital and fire department readily available.
NOTE
To Next Page
Loading...